Suggestions for 3.5

Started by Aux,

Ian @ un4seen

Quote from: amitScanning all tags will lead also to more vulnerability to errors. Right? It will also mean more scanning times?

I'm not sure what you mean by errors, but I don't think the scanning time would change very much. The existing tracks would need to be rescanned initially for the extra tags though, and that could take a while with a large library/list. That would be the case for any number of extra tags, ie. all of them or just a select few.

Quote from: amitThe question is also how do we access all these new tag information? In search window only? by library columns?

I was thinking of the "Track info" window and library.

Anyway, it probably won't happen in time for 3.5 now, but perhaps something for the future (perhaps along with tag writing).

Quote from: Pike84There doesn't seem to be a way to stop XMPlay from listing dead tracks for recovery. Since I have never had use for this feature, and probably never will, I'd rather it didn't do that at all. It doesn't really bother me much, just the idea that there is something completely useless going on. Also, it's possible that some people might want to turn it off for privacy reasons, since it is a kind of a track history.

XMPlay doesn't keep a separate list/history of dead tracks, but rather just marks tracks as dead if it can't find/open them, ie. all the dead tracks (listed in the "Dead" options page) can be found in the playlist and/or library. By default, XMPlay will check whether each of the tracks (local files) exist shortly after it is launched, but that can be disabled by adding a "NoCheckDead=1" XMPLAY.INI entry.

Here now is an update in which the queue has been switched back to the old system (of queuing playlist entries), but with some of the new stuff (eg. "Toggle queuing" and "Dequeue") merged into it...

   www.un4seen.com/stuff/xmplay.exe

Please report any problems, eg. anything broken in the merger.

Pike84

Quote from: Ian @ un4seenXMPlay doesn't keep a separate list/history of dead tracks, but rather just marks tracks as dead if it can't find/open them, ie. all the dead tracks (listed in the "Dead" options page) can be found in the playlist and/or library.
Ah yes, I got confused since the playlist and the library have separate "remove" functions (obviously) and I hadn't used the library view for a while.

amit

Another suggestion:

It is a little frustrating scrolling through long lists. The scrollbar rolls relatively to the list length thus jumps great distances and wheel scrolling is many times too slow.

What about adding middle click auto-scroll function? Similar to firefox and other software : middle clicking and moving the pointer will scroll the list to that direction. Moving away from the clicked point will scroll faster and vice versa.

REVerdi

I'm sorry, but I do not understand the need for the queue. I believe that if the design of XMPlay is to have only a single playlist, then the queue should not exist. Everything should be queued on that single playlist. If not, then it would be better to make the XMPlay a program with multiple playlists.

Cypress

Mhhh... :) :):) :):) :) the Good Queue is back Cool...!! thanks..

the queue is very very usefull 'cause i usually listen to whole discographies instead of custom playlists just drag and drop the folder artist(s) i want to listen and then middle clicking the songs i want, i could use custom playlist but to me that's creating garbage files unless you take care of them because surelly they're going to be hundreds of PLSs...

anyways the queue has its purpose and i really like it...

Salu2

Dotpitch

Quote from: amitIt is a little frustrating scrolling through long lists. The scrollbar rolls relatively to the list length thus jumps great distances and wheel scrolling is many times too slow. What about adding middle click auto-scroll function? Similar to firefox and other software : middle clicking and moving the pointer will scroll the list to that direction. Moving away from the clicked point will scroll faster and vice versa.
That scrolling feature is not built into Firefox, it works in almost every application. It would be a nice feature, but I'm not sure whether it would work with middle-click queueing. Have you tried 'List nav - Page up/down'?

Quote from: REVerdiI'm sorry, but I do not understand the need for the queue. I believe that if the design of XMPlay is to have only a single playlist, then the queue should not exist.
I disagree, queueing still has a purpose if you use a single playlist, as I mentioned.
Quote from: REVerdiEverything should be queued on that single playlist. If not, then it would be better to make the XMPlay a program with multiple playlists.
Try the latest stuff version, it has the old queue system.

amit

Quote from: DotpitchThat scrolling feature is not built into Firefox, it works in almost every application.
I am still using windows xp so I don't know about later windows versions. I think still every application implements this feature separately.

Quote from: DotpitchIt would be a nice feature, but I'm not sure whether it would work with middle-click queueing.
I don't think there would be a conflict with  middle clicking queue: Middle clicking without movement is for queue/de-queue; middle click + movement is for auto scroll. In other apps there are separate actions to middle click and autoscroll.

Quote from: DotpitchHave you tried 'List nav - Page up/down'?
yes , I know of this...Thanks ;)

 

Ian @ un4seen

Quote from: amitIt is a little frustrating scrolling through long lists. The scrollbar rolls relatively to the list length thus jumps great distances and wheel scrolling is many times too slow.

What about adding middle click auto-scroll function? Similar to firefox and other software : middle clicking and moving the pointer will scroll the list to that direction. Moving away from the clicked point will scroll faster and vice versa.

I'm not sure about that, but here's an update in which clicking in the scroller area (but not on the scroller itself) will jump a page up/down...

   www.un4seen.com/stuff/xmplay.exe

amit

Quote from: Ian @ un4seen
Quote from: amitIt is a little frustrating scrolling through long lists. The scrollbar rolls relatively to the list length thus jumps great distances and wheel scrolling is many times too slow.

What about adding middle click auto-scroll function? Similar to firefox and other software : middle clicking and moving the pointer will scroll the list to that direction. Moving away from the clicked point will scroll faster and vice versa.

I'm not sure about that, but here's an update in which clicking in the scroller area (but not on the scroller itself) will jump a page up/down...

   www.un4seen.com/stuff/xmplay.exe

OK... :)

Now how about imitating windows behavior ? keeping left mouse button pressed on the scroller will move up/down the list by one page, then a short delay and then quickly scroll pages?

Tsorovan

Quote from: REVerdiI'm sorry, but I do not understand the need for the queue. I believe that if the design of XMPlay is to have only a single playlist, then the queue should not exist. Everything should be queued on that single playlist. If not, then it would be better to make the XMPlay a program with multiple playlists.

I've never seen a proper use for it either, but it doesn't get in the way so why care a lot?

REVerdi

I think that if Ian didn't have to waive time programming the queue, then he would have more time to program other things, like better support for cue files.   :D
Also, I really think a little strange and contradictory XMPlay have a playlist and a queue, but this is just my opinion. Case closed.  :-X

Ian @ un4seen

Quote from: amitNow how about imitating windows behavior ? keeping left mouse button pressed on the scroller will move up/down the list by one page, then a short delay and then quickly scroll pages?

Here you go...

   www.un4seen.com/stuff/xmplay.exe

amit

Quote from: Ian @ un4seen
Quote from: amitNow how about imitating windows behavior ? keeping left mouse button pressed on the scroller will move up/down the list by one page, then a short delay and then quickly scroll pages?

Here you go...

   www.un4seen.com/stuff/xmplay.exe

Nice. Thanks.  :)

Markus Foti

Thanks for the standard windows scrolling behaviour!

I've rethought my previous comments (wmp visualizations - because the winamp plugin is very good), especially because they concerned plugins, which wasn't really the point.

But what would be nice would be if the embedded cover art thumbnail could be displayed in the playlist, but only once per album.  (i.e. the album cover in, say, the leftmost column, and the songs on that album listed as now, but with multiple lines per image. Showing the album cover for each song would take up too much space).

It might be too much of a hassle to program, and I am always a bit hesitant to make demands for something I'm getting for free, but it seems to me the nuts and bolts of XMplay's sound capabilities are about as perfect as can be expected, so it's extras I'm interested in...

xaaran

Quote from: Ian @ un4seen
Quote from: amitNow how about imitating windows behavior ? keeping left mouse button pressed on the scroller will move up/down the list by one page, then a short delay and then quickly scroll pages?

Here you go...

   www.un4seen.com/stuff/xmplay.exe

Ian, I can suggest that on rightclick you can leave old behavior. It would be convenient.

Tester

Dear Ian,

When resize (drag) the height of playlist/library window, it seems not really smooth.
It will go with step by step, but this is not happened when resize the width.
I hope You can add a smooth height resize to XMPlay  :)

I apologize if my explaination are not really clear since my English are very bad  :(

Thank you.

piovrauz

@Tester: when resizing the playlist vertically, it goes step by step by design.
one step = one line of the playlist, to avoid the risk to have playlist lines not readable because covered by the border.

Ian @ un4seen

Quote from: xaaranIan, I can suggest that on rightclick you can leave old behavior. It would be convenient.

Right-clicking is already assigned to jumping to the current track, but here's an update in which you can right-click while the left button is held down to switch to the old scrolling behaviour...

   www.un4seen.com/stuff/xmplay.exe

There are also a couple of queue-related tweaks... When playing tracks from the library or search results, they will now replace the queue; the old behaviour of adding them to the queue would result in the already queued tracks being played between the 1st and remaining tracks, which is a bit silly. Files/URLs can also now be drag'n'dropped into specific queue positions (they were previously just added to the end).

Cris

Quote from: Ian @ un4seenThere are also a couple of queue-related tweaks... When playing tracks from the library or search results, they will now replace the queue; the old behaviour of adding them to the queue would result in the already queued tracks being played between the 1st and remaining tracks, which is a bit silly.

Yes, that really was a bit silly.

But can't the old behavior be kept, with the small change that new added tracks be added at the beginning at the queue, not at the end? This way, already queued tracks will be kept, and will be played after all new tracks are added.
This would be like:
- queue tracks = append tracks in queue
- play tracks = prepend tracks in queue :)

Ulf kristiansen

Quote from: AuxAnd what do You guys think Ian can improve?

Hi and thanks for a great player, I think it's the best one out there.

I would like to see columns with metainfo in the playlist (like in the library). In that way I could sort the files in track-order. This is the only drawback with Xmplay as I see it; when I load several files at once, the files are scattered seemingly randomly in the playlist and there is no way to order them (except to move each file manually).